|
|
|
|
|
Volume Flow : 750 - 150,000 m3 / h Pressure : 10 - 250 daPa These units are produced in accordance with place of usage and demand. Forward curved or backward curved blades and heat / noise insulation can be used according to demand : - Aspirator (suction) unit - Mixer unit - Filter unit - Exhaust unit - First cooler unit - First heater unit - Humidifier unit - Cooler unit - Heater unit - Ventilator unit Used for : Ventilating, heating, cooling in industry (textile, chemical, medicine, etc.) and comfort facilities (movie theaters, hotels, hospitals, restaurants, schools, office etc.).
|
|
|
AL Series Volume Flow : 500 - 4,000 m3 / h Pressure : 20 - 100 daPa - Low and average pressure ventilators - Direct drive - Forward curved blades Used for : Clean air ventilation and for burners. 
|
|
|
ALYB Series Volume Flow : 100 - 3,000 m3 / h Pressure : 50 - 315 daPa - Average and high pressure ventilators - Direct drive - Forward curved blades Used for : Clean and dusty air ventilation and for burners.
|
|
|
|
|
Volume Flow : 200 - 200,000 m3 / h Pressure : 50 - 300 daPa - Low and average pressure ventilators - Different drives can be produced (direct drive, belt drive, coupling drive, etc.) - Backward curved blades Used for : Aspiration of clean, dusty and greasy air.
|
|
|
Volume Flow : 200 - 100,000 m3 / h Pressure : 10 - 180 daPa - Low pressure ventilators - Different drives can be produced (direct drive, belt drive, coupling drive, etc.) - Forward curved blades Used for : Aspiration of clean and slightly dusty air.
|
|
|
|
|
BOR Series Volume Flow : 300 - 5500 m3 / h
Pressure : 20 - 600 daPa - Average pressure ventilators - Different drives can be produced (direct drive, belt drive, coupling drive, etc.)
Used for : Places where average pressure air needed and transportation of thin granule material.
|
|
|
Volume Flow : 300 - 6,000 m3 / h Pressure : 20 - 1,000 daPa - High pressure ventilators - Different drives can be produced (direct drive, belt drive, coupling drive, etc.)
Used for : Places where high pressure air needed.
|
|
|
|
|
|
|
CTP Series
Volume Flow : 500 - 35,000 m3 / h
Pressure : 10 - 120 daPa - Low pressure ventilators - Direct drive - Backward curved blades Used for : Air aspiration, assembled on roof or on top of chimneys.
|
|
|
Customized single or group cyclones, mechanic filters and jet pulse filters which are suitable for any kind of material can be produced depending on your project’s demands.
|
|
